Change screen resolution in Windows 7

Change screen resolution in Windows 7

It's no secret that different monitors have an optimal screen resolution value, which indicates the number of dots on the screen. The higher this value, the better the image quality. But unfortunately, not all monitors are capable of working properly with the high resolution. Also, some users deliberately lower it for better performance rather than good graphics. You also need to change this parameter to perform a number of specific tasks. Let's see how to adjust the resolution in different ways in Windows 7.

Ways to change the resolution

All the methods available to change the settings of this screen in Windows 7 can be divided into three groups:

  • Use of third party software;
  • Using the video card software;
  • Using the tools built into the operating system.

That said, even when using methods with tools built into the operating system, there are different options to apply. We are going to talk about each of them in more detail.

Method 1: Screen Resolution Manager

First, let's consider using third-party software to solve the problem raised in this article using the Screen Resolution Manager application as an example.

Download Screen Resolution Manager

    1. Once the Screen Resolution Manager installation file is downloaded, the program should install. To do this, run the installer. The welcome window will open. Click on the "Next"..

    1. Then the license agreement window opens. Here you have to accept it by putting the switch on "I accept the agreement.". Then press "Next"..
    2. Next, a box opens where the location of the executable file of the program to be installed is specified. Unless there is a special reason, it is not necessary to change this directory, so just click "Following".
    3. In the next box, you can change the name of the program icon in the menu "Start".. But again, it doesn't make sense to do it without a specific reason. Click on "Next"..
    4. Then a table opens that summarizes all the data previously entered. If you want to change something, press "Behind". and perform the edit. If you are completely satisfied, you can start installing the program, just click "Install".

  1. The Screen Resolution Manager installation procedure is in progress.
  2. After the specified process completes, a window opens informing you that the installation was completed successfully. All you have to do is press the button "Finish"..
  3. As you can see, this program does not have an automatic start after installation. Therefore, you will have to start it manually. There will not be a shortcut on the desktop, so follow these recommendations. Press the button "Starts". and select "All the programs"..
  4. In the list of programs, find the folder "Screen resolution manager". Enter in the. Then click on the name "Configure the screen resolution manager.".
  5. Next, a box opens in which you must proceed to enter the license code by clicking on "To unlock".or take advantage of the seven-day free version by clicking "Try it"..
  6. The program window opens, where you make direct adjustments to the screen resolution. For our purpose we need the block "Screen settings". Check the box next to "Apply the selected screen resolution when I connect". Make sure the field "Screen". is the name of the video card currently used in your computer. If not, select the desired option from the list. If your graphics card is not listed, click the button "Identify". to carry out the identification procedure. Then dragging the slider "Resolution". left or right, select the screen resolution you want. If you wish, in the "Frequency" You can also change the refresh rate of the screen. To apply the settings, press "OKAY"..
  7. Then perform a computer restart. If you are using the trial version of the software, the Screen Resolution Manager home screen will reappear after restarting. Click the button "Test" and the screen will adjust to the resolution you have previously selected.
  8. Now, the next time you want to change the resolution using the Screen Resolution Manager, you can do it much easier. The program is self-executing and runs in the tray at all times. To make adjustments, just go to the tray and click the right mouse button (PCM) on your monitor icon. The list of monitor resolution options opens. If it does not contain the desired option, hover over the item "Plus…". An additional list will be displayed. Click on the desired item. Your display settings will change immediately, and this time you won't even have to restart your computer.

The main disadvantages of this method are that Screen Resolution Manager is only limited to one week for free. Also, this app is not Russified.

Method 2: PowerStrip

Another third party program that can be used to solve the task at hand is PowerStrip. It is much more powerful than the previous one and it specializes mainly in overclocking and changing all kinds of its parameters, but it also allows solving the task outlined in this article.

Download PowerStrip

  1. The PowerStrip installation has a number of features, so it makes sense to dwell on it in more detail. Once the installation file has been downloaded and run, a license agreement acceptance window opens immediately. To accept it, check the box «I agree with the previous terms and conditions». Then click "Following".
  2. The following opens the list of operating systems and video cards compatible with the program. It is recommended to check beforehand if the name of your operating system and your video card are in the list so as not to install the utility in vain. We must say right away that PowerStrip is compatible with Windows 7 32-bit and 64-bit. Thus, the owners of this operating system only have to check the presence of the video card in the list. If you have found the required parameters, click "Following".
  3. Next, a window opens in which the program's installation directory is specified. By default, this is the folder "PowerStrip" in the general directory of the unit's programs C. Changing this parameter is not recommended unless there is a special reason. Press "Start". to start the installation procedure.
  4. The installation procedure runs. After that, a window opens asking if you want to add some additional entries to the Windows system registry to make the program work more properly. To do this, click "Yes"..
  5. A window then opens in which you can adjust the display of the utility icons in the menu "Start". and in "Desk".. This can be done by checking or unchecking "Create a PowerStrip program group on the Start menu" for the menu "Start". (enabled by default) and "Put a shortcut to PowerStrip on the desktop" to "Desk". (disabled by default). After specifying these settings, click "OKAY"..
  6. You will then be asked to restart your computer to complete the installation of the program. Before, save all open but unsaved documents and close running programs. Then click to activate the system reboot procedure "Yes". in the dialog box.
  7. After restarting the PC, the utility will be installed. It runs in the system registry, so it will automatically run in the background when the system starts. For our purposes, click on its icon in the tray PCM. In the list that opens, move the cursor to «Show profiles».. In the additional list click "Set up…".
  8. The window is starting to appear. "Display Profiles".. We will be interested in the settings block "Resolution".. Drag the slider in this box to the left or right to set the desired value. At that time, the value in pixels will be displayed in the lower field. In the same way, moving the slider on the "Regeneration rate". You can change the refresh rate of the screen. The corresponding value in Hertz is displayed to the right of the slider. When you have made all the settings, click "Apply". и "AGREE"..
  9. The display parameters will be changed to the specified parameters.

Method 3: Use the video card software

The parameter of the screen that we are studying can also be modified using the video card manufacturer's software, which is installed together with the video card and is used to control it. In the vast majority of cases, this type of software is installed on the computer together with the video card drivers. Let's see how to change display settings in Windows 7 using software designed to control your NVIDIA video card.

  1. To run the appropriate utility, navigate to "Desk". and click on it. PCM. From the drop-down list, select "NVIDIA Control Panel."There is another option to run this tool. By default, the utility always runs in the background. To activate your control window, go to the tray and click on the icon "NVIDIA Setup" icon..
  2. With any order of action, the window starts up "NVIDIA Control Panel". On the left side of the window is the "Select task".. Click on the item in it "Change the resolution."located in the settings group "Show"..
  3. A window with various screen resolution size options opens in the middle of the window. You can select the option that suits you in the area "Resolution".. In the countryside "Update rate". there is an option to select from a list of refresh rates on the screen. After configuring the settings, press "Apply"..
  4. The screen goes blank for a moment and then lights up again with the new settings. A dialog box appears. If you want to apply the parameters permanently, you must press the key. "Yes". before the timer expires. Otherwise, when the timer expires, the settings will automatically return to the previous state.

В "NVIDIA Control Panels" It has a very cool feature that allows you to set the resolution even if it is not compatible with the default monitor settings.

Warning. When performing the following steps, please note that you are doing so at your own risk. It is even possible that the actions described below could cause damage to the monitor.

  1. In our case, the maximum resolution of the monitor is 1600 × 900. Standard methods will not be able to set a higher value. We will try to use "NVIDIA Control Panel." Adjust the setting to 1920 × 1080. To change the settings, click the button "Adjustment…".
  2. A window opens that presents a series of additional parameters that we do not observe in the main window. You can increase their number by checking the checkbox, which is unchecked by default, in front of the item "Show 8 and 16 bit resolution". To add the selected combinations to the main window, simply mark the check boxes next to them and click «OK»Once the values ​​appear in the main window, to apply them you have to carry out the same procedure already mentioned above.

    But, as is easy to see, this additional window is configured with rather low quality parameters. They are not displayed in the main window simply because they are rarely used. Developers don't want to clutter up the main window "NVIDIA Control Panels" low-quality settings are rarely applied. We, on the other hand, have the opposite task: to create a higher resolution than in the default configuration. To do this, click «Create custom resolution ...».

  3. The window for creating user settings opens. Here you have to act very carefully, as already mentioned above, wrong actions in this section can lead to deplorable consequences for the monitor and for the system. Let's move on to the configuration block "Display mode (as reported by Windows)". The fields in this box show the current vertical and horizontal resolution of the screen in pixels and the refresh rate in Hertz. Enter the values ​​you need in these fields. In our case, since the parameter must be set to 1920 × 1080, in the field "Horizontal pixels". enter a value «1920»and in the field. "Vertical lines" - «1080». Now click "Prueba"..
  4. In case the set values ​​do not exceed the technical capabilities of the monitor, a dialog box will be displayed indicating that the test has passed successfully. To save the parameters, it is necessary to click on this window before the timer countdown ends. "Yes"..
  5. Returns to the parameter change window. On the group list "Personalized". The parameter we have created is displayed. To be able to activate it, check the box next to it and click "OKAY"..
  6. Automatically return to the main window "NVIDIA Control Panels". As you can see, the parameter created here is also displayed in the group "Personalized".. To activate, highlight the value and press "Apply"..
  7. A dialog box will then appear in which you must confirm the setting change before the timer expires by pressing the key. "Yes"..

All of the above applies to computers and laptops with a discrete adapter from NVIDIA. AMD graphics card owners can perform the same manipulations using one of AMD's native programs: AMD Radeon Software Crimson (for modern graphics cards) or AMD Catalyst Control Center (for older models).

Method 4: Use the tools built into the system

But it is also possible to solve the task in question using only the tools built into the system. And its functionality is sufficient for most users.

  1. Click on "Starts".. Then select "Control Panel"..
  2. Then click "Design and customization".
  3. In a new window on the block. "Screen". select option "Adjust screen resolution"There is another option to get to the window we want. To do this, click PCM by "Desk".. From the list, select "Screen resolution"..
  4. The use of any of the algorithms described opens a standard tool to change the parameter of the screen that we are studying. In the countryside "Resolution". the current value is indicated. To change it, click on this field.
  5. A list of options opens with a slider. To increase the quality of the displayed material, drag the slider upwards, to decrease it downwards. At the same time, the field will show the value of the slider position in pixels. Once the slider is set to the desired value, click on it.
  6. The selected value will appear in the field. To apply, click "Apply". и "AGREE"..
  7. The screen will go blank for a moment. The selected parameters will then be applied. In the window that appears, press thebutton. "Save changes" button. until the timer counts, otherwise the display settings will return to their previous values.

It is possible to change the screen resolution both by applying third-party programs or the software that comes with the video card, as well as by using the built-in tools of the operating system. Therefore, in most cases, the functions provided by the operating system are sufficient to satisfy the needs of most users. It only makes sense to resort to third-party software or video card settings if you need to specify a resolution that does not fall within the standard range or apply parameters that are not available in the default settings.

We are glad that we were able to help you with your problem.

Describe what has not worked for you.
Our specialists will try to respond as quickly as possible.

Has this article helped you?

 


Creative stop
Trucoteca.com
a how to do
Heroes Zone
Discover-Online